JetEtch Pro Specs:

Dimensions

Etcher unit (mm/in) 290 h x 290 w x 419 d / 11.5 h x 11.5 w x 16.5 d

Bottle container, each unit (mm/in) 230 h x 110 w x 110 d / 9 h x 4.25 w x 4.25 d

Weight (kg/lbs)

17 / 38 (excluding bottle container and accessories)

Power

350 W @ 95 - 130 VAC or 350 W @ 210 - 250 VAC

CDA/N2 Requirements

CDA 4.2 kg/cm2 / 60 –100 psi

Nitrogen supply 2.8 lpm / 0.1 cfm

Etchants Available

Etchant volume: .1, .2, .5, 1-10mL/min for Pulse; 1-6mL/min for Vortex

Fuming nitric acid

Fuming sulfuric acid

Sulfuric acid (concentrated reagent grade)

Nitric : sulfuric acid mix 6:1, 5:1, 4:1, 3:1

Sulfuric : nitric acid mix 6:1, 5:1, 4:1, 3:1

Temperature Ranges

JetEtch Pro and CuProtect

Nitric acid (°C) 20 – 90

Sulfuric acid (°C) 20 – 250

Mixed acids (°C) 20 – 100

JetEtch Pro TotalProtect

Nitric acid (°C) 5 – 90

Sulfuric acid (°C) 5 – 150

Mixed acids (°C) 5 – 100

(mixed etchant range automatically calibrated to ratio selected)

Etching Time & Modality

(user selectable)

1 – 1800 seconds in 1.0-second increments

Pulse Etch mode, Vortex Etch mode

Program capacity: 100, user-defined, in nonvolatile memory

JetEtch Pro CuProtect and TotalProtect

Bias selection: 0.0 – 20 V in 0.1-V increments

JetEtch Pro TotalProtect

1 – 3600 seconds in 1.0-second increments

Program Daisy-chaining: combine multiple programs in succession without interrupting the etch process

Heat-up Time

(user selectable)

0 – 120 seconds in 1.0-second increments

Rinse Options

Nitric acid, sulfuric acid, no rinse

Reservoirs

500-mL or 1-litre bottles

33/38/40/45-mm cap sizes

4 bottles standard: 2 acid, 2 waste

Certifications

CE certification, SEMI S-2-93, SEMI S-2-2000

Accessories 

All JetEtch Pro systems are supplied with a standard basic Accessory Kit. A wide range of Accessory Kits and custom-designed Monolithic Gaskets is available (contact Nisene for details). 

Die-down BGA Kit 0300606

DIP/SIP Kit 0300601

PBGA Kit 0300605

PLCC Kit 0300602

QFP Kit 0300604

QFN/MLP Kit 0300609

SOIC Kit 0300603

Universal Accessory Kit 0300612

Installation

Installation in chemical fume hood required. 0.5 meters/sec minimum flow rate (100 surface ft/min)